As a user, it is necessary not only to standardize the operation process, but also to maintain the full expansion device of the stentering machine once a day during the intermittent operation of the production operation, which is also the basic way to ensure the effective operation of the frame system. Moreover, in the working gap, the floc on the filter net in the drying room should be cleaned in time, which is beneficial to improve the hot air conduction efficiency.
Secondly, in the operation of the stenter, in order to effectively reduce the temperature of the finished surface and reduce the crease of the cloth, the operator should turn on the cold air device and the cooling water circulation system in time. At the same time, the static elimination system should be turned on in time to facilitate the smooth swinging and packaging of the finished polyester woven fabric. It is beneficial to reduce the leakage of the cloth edge by replacing the broken needle plate in time with the working gap.
It should be noted that in the process of tentering and shaping the fabric by the tenter setting machine, if it is found that the edge of the fabric is often torn, the surface of the fabric is not flat enough after the setting, and the stability of the width of the door is insufficient, it is necessary to carefully check each Expansion device in the drying room. At the same time, it is necessary to adjust the adjustment handle of the hot air circulation direction appropriately. The state of the stenter setting machine needs to be adjusted in time when the variety is changed.http://www.haida-textile.com/