Home > Knowledge > Content

Stenter machine safety precautions

May 08, 2018

Usually we use tenter setting machines to perform various types of textile products for stentering, thereby improving the surface quality and intrinsic properties of the articles. It should be noted that during the operation of stenter machines, it is necessary to ensure safety and achieve safe production.


Next, we mainly introduce some questions about the security aspects that need to be noticed during the operation. First of all, with regard to the operation of the tenter setting machine, it is necessary to control it through the control panel. The maximum parking is the button with the red mushroom head. It is placed on the control panel and the prominent position of each unit. It can immediately cut off the control system of all electronic control systems. , stop all working parts.


However, due to the inertia of the equipment during operation, it may take some time to completely stop. For example, the circulation fan usually takes 3 to 5 seconds to completely consume the accumulated energy. Therefore, pressing the maximum stop button of the stenter can only stop all the transmission parts immediately, and cannot immediately stop the circulation fan. After restarting the maximum parking button, the maximum parking button release switch must be turned left.


It is important to remember that in order to ensure safe production, the operation of the stenter must be performed by professionals. It is usually required to train the operator on the control points and technical characteristics of the equipment before starting work. In addition, the operator must carefully read this manual. It is important to remember that only operators who have received training from a professional can read and understand the device operating instructions before operating the device.


Also note that the operation of the tray and electrical control box is very important during the operation of the tenter setting machine, and this is also an important basis for providing operation. In the working area of the tenter setting machine, there must not be any miscellaneous personnel or miscellaneous items so as not to affect the operation. At the same time, it is also a good condition for the operator to make a prompt response in case of an emergency.http://www.haida-textile.com/