Stretching machine equipment is mainly used as a tenter and stereotypes finishing function, while the tenter and stereotypes are mainly able to improve the cleanliness of the fabric door width. At the same time, the state of the warp and weft yarns in the fabric can be adjusted by using the properties of the tenter setting machine, so that the weft can be corrected and the deformation of the fabric during the wearing process can be avoided.
It can be seen from the above description that in fact, the working principle of the tenter setting machine equipment is based on the plasticity of the natural fiber fabrics in the wet conditions, gradually widens the width of the fabric to a specified size, and performs the drying and stable treatment. .
The hot air tenter setting machine which is currently popular in the market is a dual-purpose card clothing. For users, the drying room temperature is adjustable from 50 to 250 degrees Celsius. The tenter drying process is performed when the temperature of the fabric and the drying room are controlled at 100 degrees Celsius, and the heat setting process is performed when the temperature of the pinhole and the drying room is controlled within the range of 180 to 210 degrees Celsius.
The main structure of the tenter setting machine includes a cloth stretching section, a drying room, and a cloth discharging. From the use of the results to analyze, the organization's main advantages are: installation adjustment fast, energy-saving energy feedback and regeneration, a platform integrated drive and control.
The main highlights of stenter products:
1. Adopt a compact multi-motor system for regeneration;
2. Modular design that can shorten the connection length and installation time;
3, through the bus system PROFIBUS DP progress data exchange process;
4, high-precision speed and torque control to ensure a constant tension.
In short, as a continuous processing dyeing and finishing post-processing equipment, in the entire transmission system of the tenter setting machine, in addition to the synchronization of the 7 units of the stenter machine, two main chain synchronizations are also involved. Circulating fan and exhaust fan frequency conversion drive, amplitude modulation drive and so on. http://www.haida-textile.com