Home > Knowledge > Content

The form of holding cloth for Clip and Pin for stenter machine

May 14, 2020

There are two kinds of commonly used form of holding cloth are that clip and pin.The pin plate structure is above the chain of machine, and the fabric is fixed on the needle plate structure.The needle plate structure of the chain is easy to stick with slurry, resulting in the fabric on the needle instability, resulting in the fabric door width is inconsistent, quality decline.

After the improvement of technology, a cleaning device can be provided to clean the needle plate of the stenter machine.The motor is used as power and the motor output shaft is equipped with steel wire brush.The position of the motor is adjusted by the handwheel, so that the steel wire brush touch the clip, and then the motor is started to clean. This device solve the pin cleanning problem completely。